Makita dolmar 9000/9010 ignition wanted no spark ?

[Ghilley]

Sorry buddy if I do what ? I know the new flywheel and module will let her run It's finding the parts none of them numbers are on my module it's a prufrux cdic120//2 There's 501 and 415 Stamped on it to.

[Ghilley]

Iv tried to get hold of the early module but no longer available and I believe you need a flwheel to go with the later one so uneconomical to fix The saw is in good nick position is like new looking threw the port I was looking for a scrapper or parts.

[peatff]

Here's the one it's in US but Randy sells it so it must be good

[Ghilley]

Looks like the old atoms but will it work on my ignition module ?

[peatff]

Ask the seller on ebay they usually know what their parts will do. You could ask about postage as well but at something under £20 it's got to be worth a shot. Here's the one randy sells and what he doesn't know probably isn't worth knowing

[wisecobandit]

I would say give it a go with a nova or similar. Ive used them to replace 2 wire trigger systems ad they've always worked on stihls.

You wont know until you try it and doubt anyone will be able to give you a straight forward yes/no answer.

If its the trigger unit it should work, if its the coil it probably wont.

[Ghilley]

Hi all it's the coil side thats gone down trigger is ok iv tried the lad in the USA no joy just automated answer I need a ignition module for a dcs 9000 any help thanks

[shavey]

hello here is a few part numbers for the dolmar model PS-9000

 

IN 1993 THEY USED PART NO 024 143 020

IN 1996 THEY USED PART NO 024 143 020

IN 1999 THEY USED 3 DIFFERENT PART NOS 024 143 020 & 024 143 050 & 024 143 100

IN 2000 THEY USED PART NO 024 143 051 WHICH IS THE MODIFIED 024 143 050

AND THIS WAS THE TIME THERE WAS A CHANGE OVER TO THE NEW MODEL 9010

 

now it looks like that makita used two modules 024 143 020 and 024 143 051

here is a link that should help you choose [http://www.manualslib.com makita dcs9000 ph specification page 3

[shavey]

i would say that the module number for that saw would be 024 143 020 various sites say this number for the earlier ones its a pain in the neck trying too find these parts mate

[Ghilley]

Ok all sorted iv got. A flywheel and coil coming brand new from the good old USA for les than £100 this will allow the saw to run a 13500 rpm and better starting when worm not that it was ever a hard starter Thanks for the input everyone