36"+ Bar for Sachs Dolmar

[hawthornheavyhorses]

Hi All,

 

I'm after a 36"+ Bar for my Sachs Dolmar 143 as I'm about to get into a bit of Alaskan milling and I have a super 30" Oak butt available to me to which my current 28" bar is not going to big enough for.

 

Anyone know where best to source one? Ebay hasn't got anything over 30" and I've had a search of dealers websites but seems that I may need to adapt a Stihl one?

 

Thanks,

 

Matt

[IVECOKID]

Hi ,i retro fitted a STIHL 30" on my old 153 just had to re-drill oil holes to match Sachs dolmar bar .

 

Running a 404 chain too .

 

Ste

[miker]

i adapted an oregon bar to fit my dolmar 9000,does yours have the 14mm mount,you can get the smaller bar studs to fit husky mount but takes a while from dolmar

[hawthornheavyhorses]

does yours have the 14mm mount

 

Not sure. Do you mean 14mm bar nuts?

[miker]

no mate, the slot in the bar will probably be 14mm

[shavey]

no mate, the slot in the bar will probably be 14mm

 

hello as miker said the dolmar /makita 9000 and 9010 are on large bar mounting studs and they take the same bar chain combo as the sachs dolmar 133 / 143

 

here are two oregon bar numbers that iam sure will fit

 

36RNFD009 404 CHAIN 36''

 

36ONFD033 404 CHAIN 36''

 

THE SAW IN THE PICTURE BELOW I HAVE CHANGED THE BAR STUDS BACK TO 8MM SO I CAN USE A MORE VARIED RANGE OF BARS

 

THIS A DOLMAR PS 9010 8-TOOTH SPROCKET WITH A 32ORNDD009 BAR MOUNT 32'' 3/8 0.50 GAUGE :thumbup:

Edited March 15, 2014 by shavey

[hawthornheavyhorses]

Thanks Guys , I'll double check when I am over at the yard tomorrow that it's 14mm and then order one up.

[shavey]

Thanks Guys , I'll double check when I am over at the yard tomorrow that it's 14mm and then order one up.

 

hello you could always send that lovely 143 down to me i would sort out a bar for you and send it back a few years time :lol:

[hawthornheavyhorses]

hello you could always send that lovely 143 down to me i would sort out a bar for you and send it back a few years time :lol:

 

Bet you would!!