Jump to content

Log in or register to remove this advert

Garage Done Over (SL6 - Berkshire)


rxe
 Share

Recommended Posts

Not a great first post, but here goes. Last week a bunch of scrotes broke into my garage and cleaned out quite a lot of the decent stuff. I'll list it below, just in case anyone is offered it. If anyone is living in the SL6 area - be warned, there is an absolute crimewave going on. Loads of people have been done, all after garden machinery, horse trailers and the like.

 

So, what did I lose:

 

Stihl MS880, 25" bar - very good condition, light use only. Nothing to really identify it, apart from the fact that 880s are pretty rare.

 

Stihl 046, 18" bar - good used condition. It was running an 8 pin sprocket, which is non standard

 

Stihl 024, 15" bar - good used

 

Stihl HS81R-30 hedgecutter - good used

 

Stihl TS400 cutoff saw - well used, pretty scratched up

 

And most annoyingly, my milling 070 AV. Not a great looker, but totally rebuilt by me. It had a 3/8" Cannon Superbar at 28" long, which should make it pretty unique in the UK (getting a 3/8 bar in Stihl "large" mount was hard...). It was also set up with milling chain, which combined with the lack of a chain brake, may make it rather a challenge for the unsuspecting idiot they sell it to. I've attached a pic from the last milling expedition.

 

I'm keeping an eye on ebay (the 070 and 880 will be pretty obvious), can anyone think where else I should be looking? I'm not so upset about the modern stuff: insurance + cash will fix that. The 070 really makes me mad - mainly because they'll probably chuck it it out as unsaleable.

 

Off topic, they also got a 5kW generator and 2" trash pump, both of which were very new.

 

Thanks for looking, and lock your stuff down....

 

rxe

597653fde95e5_StihlLife.jpg.b11e7dda05bb9385c3ad8b1ede1446bb.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

Like an idiot, I haven't noted the serial numbers. :blushing: The dealer that sold me the 880 and HS81 is still in business and might have recorded them - the others were bought from a dealer long since gone.

 

Yes, before you ask, I've spent a frantic weekend noting down the serial numbers of every bit of kit that I have left! :001_smile:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.