Hedge cutting

[zeroluke]

Hi first hedge of the year. Its 44mtr long and there might be one on the back fence 8mtr long. Similar to the one I posted last year when I gave my hedge cutter a test run and you gave prices, but I can't find the post.. If you were wondering how I measured it without seeing it first, there is a distance / area measuring map on a website I found through work. I believe it to be accurate, too. I will be taking my measuring wheel just in case, though. Thanks Luke

[Daniel Jiggins]

Do you mean you priced a job without seeing it using a satellite map?

 

Sorry bit confused, maybe the heat!

[zeroluke]

Yeah kind of. It is the hedge that backs onto where my brother lives. I've cut me brothers side before. It has a marker system does the webmap, and point A, B and so on it will measure the distance or area etc. It wasn't that far out either. It measured 44m and my measuring wheel measured 38m. Not brilliant, but gives a good ballpark figure. It isn't that bad growing out of the sides, the hedge. A few foot at one end. 1 at most at the other.

[zeroluke]

actually no. I measured up for it without seeing it. What would you all would charge for it is what I want to know. Last time some said in between £40 and £140 or so. As for heat sending you round the bend. I have been the same myself for the last 2 weeks from about 11AM, if not sooner.

[zeroluke]

Distance Calculator Thats what i used, then I went with the measuring wheel

[Old Mill Tree Care]

I look at the job with my own eyes, charge as much as humanly possible then use my Easy Lift Harness to ensure the work us quick and easy.

Perfect!

👍👍😄

 

 

Sent with my iPhone from me, to you!

[Daniel Jiggins]

I look at the job with my own eyes, charge as much as humanly possible then use my Easy Lift Harness to ensure the work us quick and easy.

Perfect!

👍👍😄

 

 

Sent with my iPhone from me, to you!

 

Couldn't agree more I only once quoted a job blind never again!!

 

I've been using the truck this week as a work platform saves a lot of time especially with the remote tipper.

[zeroluke]

I didn't quote the job blind, I'm going through again to sort price in half hour. I marked up the distance based off a satalite mapping system. It is fairly accurate. I also did post the state the hedge was in just after the original post when me brother phoned me and told me, only I didn't know about any 5 minute wait rule on posting.