Jump to content

Log in or register to remove this advert

Close call


Justme
 Share

Recommended Posts

I am feeling lucky today.

 

During the first major snow fall we had been away for a couple of days. When we got back our genny was running (thats normal its fully automatic) but there was no power - eek.

 

Again thats not that unusual as I am always fixing it. Tried to fix it in the failing light & thought it was best to give up till the next day & start the tractor & PTO genny.

 

So turned the key & the engine turned over about 1/2 a turn slowly & stopped. Now that could have been due to the cold, or a bad connection & I could have kept on trying to start it but I had an inkling that there was more wrong with it so I left it.

 

Fixed the original genny using a work light. So left the tractor as it was till now as its to cold for that sort of work.

 

So that brings us to today. My suspicion was that the heavy rain had got into the exhaust & then into the engine cylinder.

 

Had that happened & I turned the engine over fast it could have done some serious damage. So I whipped out all 4 injectors & then turned the engine over on the starter. Quite a lot of water was ejected out of the first 2 cylinders. Kept cranking for a bit & then again after a rest. Once I was sure all the water was out I refitted all the bits after a quick clean on the injector nozzles. A long crank & she was away again so no damage.

 

I had fitted a tin can to the top of the exhaust but obviously had done so to late. I will be getting a pair of those flap things now so I can fit them to both tractors.

Link to comment
Share on other sites

Log in or register to remove this advert

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.