Hakki Pilke 1x37 help please

[Vikki]

I have got a Hakki Pilke 1x37.

 

After using it for 3 hours running ok, the ram started to cycle backwards and forwards all of the time without stopping.

 

We have been clearing out underneath it so there was no sawdust blocking it.

 

Any advice or help would be very much appreciated.

 

Many thanks

 

Vikki:001_smile:

[Steve Bullman]

theres a little nut somewhere that burrs and needs filing round. I forget exactly where. I had the exact same problem as this and started the same thread a few years ago which contains the full answer. I'll try and dig it out.......

[Steve Bullman]

Vikki, heres the thread, but the pdf link isnt working anymore. It should be on page 23 of the instructions though if you have them. See Mikes post.

 

http://arbtalk.co.uk/forum/maintenance-help/4208-problem-hakki-pilke-1x37.html

[Michael C]

http://www.mlarge.com/images/upl_files/000325.pdf

 

Page 23 as Steve says.

[Steve Bullman]

thats the one, thanks Michael

[Vikki]

Brilliant, thanks for the quick replies, I will give that a try in the morning. :-)

[gensetsteve]

Try turning the bolt round one flat often cures it. I would get some spare bolts from memory they are higher tensile strength than normal bolts and although under virtually no strain ours used to shear off occassionally.

[bulklog]

There is a spring also that I just moved up that cured mine .