Jump to content

Log in or register to remove this advert

Stihl ms 230


mick irwin
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

alright guys hows it goin? right spudulike i did your test, it started, ran until she struggled then i took off the breather pipe from the fuel tank like you said and without turning the saw on its side, it ran no problems again, exactly the same as when i opened the tank, problem is the breather is clear as a drum man, all of the pipes are clear, i opened the wee ball that must be the breather yesterday and it was clean too, well the parts i could reach as when i split it it was sealed inside both halves, does this help at all? does this mean i should replace the breather system?

Link to comment
Share on other sites

Still betting on the carb:thumbup1:

 

Nah Barrie, get the butter and jam on that Aussie hat of yours:lol:

 

In answer to the breather, stick the end that is connected to the tank in your gob and suck, you should be able to get some air through it, when you blow down it, if the valve is one way, you will get no air through it.

 

If you can't be arsed then just get a new one and let us know that it has cured the problem so we can ask Barrie - Gardenkit to list pics of him munching that hat:blushing::lol:

 

I hope this sorts it, it sounds pretty conclusive to me, not a common fault but have had similar on a few saws usually causing poor running in a short period of time!

 

Good luck, hope you get it sorted.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.