rayco hg20hd clutch

[John Shutler]

im after a replacement cluth for my rayco grinder.

what are the options?

is there a solution that would be more durable?

cheers

[Johny Walker]

im after a replacement cluth for my rayco grinder.

what are the options?

is there a solution that would be more durable?

cheers

 

iv had 3, rg 20, found the clutshes to be be fairly bullet proof ,are u sure its the clutch & not the belts slipping a tad,

[John Shutler]

iv had 3, rg 20, found the clutshes to be be fairly bullet proof ,are u sure its the clutch & not the belts slipping a tad,

 

that could be the case.... but the cutter head isnt engaging at all. do you think if the battery was flat that would cause the clutch to not engage properly? as we had to jump start the machine to get it running

[Johny Walker]

that could be the case.... but the cutter head isnt engaging at all. do you think if the battery was flat that would cause the clutch to not engage properly? as we had to jump start the machine to get it running

 

check all the wiring ,may justb a lose connection

 

 

did it work ok before the battery went down ,had a dicky wire on 1, put a new spade on it was fine ,

[John Shutler]

hmmm morning at the yard needed i think.

who did you use for parts johny?

[Johny Walker]

hmmm morning at the yard needed i think.

who did you use for parts johny?

 

west con, got a quote for the brake cable £95+vat ,then fixed it mi sen .not sure whos the dealer now , good belts make a big diffarance ,cheepos wer very quick & soon slip ,owt else just ask

[John Shutler]

west con, got a quote for the brake cable £95+vat ,then fixed it mi sen .not sure whos the dealer now , good belts make a big diffarance ,cheepos wer very quick & soon slip ,owt else just ask

 

westcon wanted 359 + VAT for a replacement clutch

thanks for your help

[Johny Walker]

westcon wanted 359 + VAT for a replacement clutch

thanks for your help

 

what about a us dealer ,get it posted as a gift ,

[Johny Walker]

not sure but it may be the same as a vermeer ,252,dosko etc, try cross ref numbers wi other makes ,may save a few ££££http://www.google.co.uk/aclk?sa=l&ai=CSUYhxAoTULy8JYad8APJioGgBcT25dkB9Lboziigo4_dAhAEKAZQ9PeewQRgu_6mg9AKoAHggsP-A8gBAakCRaTgCNZhuj6qBCFP0Mm9VxbEH2T-n5FeelY7ATbPTjXIp9jCKqARVMWXjfk&num=4&sig=AOD64_1d5pXAp-uE12mybfB3BOPHNDYgrw&ved=0CIUBENEM&adurl=http://warnerelectric.co.uk

 

has this come up

 

http://www.google.co.uk/url?sa=t&rct=j&q=rayco%20rg25hd&source=web&cd=1&sqi=2&ved=0CE0QFjAA&url=http%3A%2F%2Fwww.raycomfg.com%2Fproducts%2F4-mini-work-force%2F3-rg25hd&ei=ogsTUIaCE6et0QXCx4HwBg&usg=AFQjCNH3wT6MkKx1wDrpdwqjiYSHsGGB4w

Edited July 27, 2012 by Johny Walker

[Johny Walker]

electromagnetic clutch - Google Search

 

even