Sachs Dolmar 116 si. Part needed

[motty]

Does someone out there have for sale, or know where I can buy, a Fan Housing part number 112 112 540 for a Sachs Dolmar 116 si.

 

The cir clip that retains one of the spring loaded starter pawls came off and the pawl destroyed the fan housing. It's a nice saw to use and I would very much like to get it back into operation.

 

I am in Australia but would be happy to buy out of the UK, US or Germany if needs be.

 

David

Edited May 21, 2012 by motty
Add info

[Albe013]

hello matty

if you go on the uk e-bay there is some dolmar 116 parts the part you are after might be there

hope that helps albert

[motty]

Thanks for the tip Albert. I had a look but the part I need is not there.

 

The part alongside what I need is there and a fan housing for a different model of saw is there. Close but no banana!

 

David

[motty]

Additional information on the part required.

Fan Housing P/No 112 112 540

Or

Starter Assembly P/No 114 112 630 (includes above part)

 

According to the IPL these parts will also fit the 120si which hopefully increases the chances of someone having what I need.

 

David