Log grab for a JCB??

[pro bros]

Useful enough looking, and no hydraulics!

 

 

i have very similar on tracked 6t jcb 360 see digbits clearing gorse this week about 1.5 acres per day rooted out and piled on fire boulders/fence etc lifted to side only down side no rotation

[woodlander]

Got one on my 3cx with rotator ,works very well without the extra hydraulic service ,you definately need the rotator , not handling big timber any more so you are welcome to have a look Im in north Powys trouble is I'm working away till the 26th Feb .

[WFWales]

Got one on my 3cx with rotator ,works very well without the extra hydraulic service ,you definately need the rotator , not handling big timber any more so you are welcome to have a look Im in north Powys trouble is I'm working away till the 26th Feb .

 

Thanks again all.

 

Woodlander, PM with your contact details and I'll pass them onto the WFW member who was interested.

 

Cheers

 

Martin

[NI Tree]

Got one on my 3cx with rotator ,works very well without the extra hydraulic service ,you definately need the rotator , not handling big timber any more so you are welcome to have a look Im in north Powys trouble is I'm working away till the 26th Feb .

 

how have you got the pipes and extra spool valve rigged up a i was condering it to

[woodlander]

We put quick couplings on both the hydraulic pipes just below the top joint on the back actor taking out the bucket operation ,leaving enough slack for the extendahoe I have a power cable going to the rotator which allows me to divert fluid from the rotator to the grab

I hold a small switch in my hand which allows me to switch the bucket control lever from open and close grab to left /right rotate works really well I should have some photos of the connection in a week or so .