Jump to content

Log in or register to remove this advert

tow bar winch


parkin287
 Share

Recommended Posts

Log in or register to remove this advert

I mounted a 8,000lb winch to the draw bar of my old L200 4 life. I was lucky in that it was a square section draw bar which was bent out by design. So with a 2ft piece of heavy angle fixed to the tow plate I could mount the winch plate with additional clamps. The cables run in a protected route to the battery via a fuse and isolator switch, with 2 doubled up connectors so I can remove the winch. With the number plate covered I fitted an extra plate to the top. I have a combination hitch mounted underneath, so with a farm type plate say 18" long with 2 big holes I can run the winch cable though a pulley and back to the plate in the hitch, which doubles the pulling power. To stop the truck being pulled back I used wedges at first then got a local lad to make me up a winch fork (sorry forgot the proper name) which also goes from the hitch to the ground - works a treat.

 

I leave the engine running if working hard, it can pull out say a 20"dia ash tree 20 ' long, or say 18" dia hangups. I have used it to pull trees say 15" dia 60' high while felling with 3 - 1 tonne slings only 10 ' up but acting as a spring, then the winch cable - worked a treat, top twigs hit the truck.

 

Overall it really helps and above all make work safer, if of interest I will try and get my son to put up some pictures:thumbup1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.