Jensen rollers problem

[Ben Moss]

Hi, I've got a Jensen 518 tow chipper a '98 I think. The problem is the rollers have started to stop feeding every now and then this is accompanied by one of the led's on the circuit board cutting out. Anyone have any ideas or will it have to be checked bit by bit? Thanks in advance for any help.

Edited October 9, 2010 by Ben Moss

[Johny Walker]

check & clean all electrecl conections & wiring behind ignation ,the green light should be on all the time

[garth mc garth]

i had similar problems with my 528. check the speed sensor on the flywheel or the roller restart buttons on either side of the hopper

[Ben Moss]

Thanks for the replies. I've had the afternoon tinkering and it turned out that the speed sensor needed adjusting. I put it at 2mm gap from the flywheel and it seems to have sorted it. Result. Thanks again for the replies.