Dolmar 116

[Michael Wiggins]

I am rebuilding a dolmar 116. I'm having trouble with the rubber buffers. On the spares drawings,it states 5 all the same,part no 965 403 430.on my saw there are 2 of these and 3 others I can't find. I am totally confused by this. Anyone got any ideas. Thanks Michael. 

[Dan Maynard]

Is it definitely a 116? I'm not sure the difference between that and a 116si which I think is maybe the same as a PS6000. I also have the idea a 120si is the same as a PS6800, same saw but bigger cylinder.

 

I have a PS6000, maybe can dig out the parts diagram for that and have a look.

[Fatboy2017]

All 5 are the same. Same on 116, 116i,120i and 6000i /6800i even 9010 fit. Its possible that the mounting came loose at some time and enlarged the thread in the tank and somebody fitted a mount from something none Dolmar. If so, maybe helicoil and fit new original mounts. Mounts still available from L& S Engineering. Plenty of s/h tanks around, both metal and plastic. 

[Michael Wiggins]

Thanks for advice. It had been abused.ihave put in inserts,it's now good.