For Robert S Chip Capacity

[White Noise]

This was 2 full loads of chip from my 110 hi cap tipper

 

Please bear in mind I have fitted a tool box which does take up some of the chip cap .

Edited February 24, 2010 by White Noise

[Robert_S]

Thanks paul

 

it carrys quite a bit eh, how much cube do you recon in a load 3?

[White Noise]

Thanks paul

 

it carrys quite a bit eh, how much cube do you recon in a load 3?

 

T B H I wouldnt have a clue . General rule of thumb is if I can get two fingers under the mud guards when its full its ok as I can get nearly two fists under when empty:blushing: I think the BFG Tyres help loads as they have 50 psi in them . I will see if I can get a vid up for ya

[Dean Lofthouse]

I can get two fingers under mine when full but it's a 130 with helper springs and no tool box

[White Noise]

I can get two fingers under mine when full but it's a 130 with helper springs and no tool box

 

So does that mean I over load her ? . When shes full its like being in a boat and cornering is not good . Although the brakes are great

[Dean Lofthouse]

So does that mean I over load her ? . When shes full its like being in a boat and cornering is not good . Although the brakes are great

 

It means if you do, I definately do

[White Noise]

It means if you do, I definately do

 

Well thats what my landys for earning pennies . Anyway they look better full

 

 

Mine you the other day I was overloaded again went round a corner and a load of chip slid out . I,m sure you,ve been there .