Grinder spare parts

[RobRainford]

hi guys

 

Had a bit of a mishap in the new container for all my gear, my dad was holding the chain grinder on the bench in its place where it will be fixed, but we had no bolts big enough to fit through the bench and the machine. AS i turned round to see if there were any bigger bolts anywhere, and he turned round aswell and let go of the grinder, with it already hanging over the edge. it decided the floor was a better place to be.

 

The fan at the top has all smashed, bent one of the long bolts that run through down the side of the motor housing and smashed all the black covering for the fan.

 

ive looked on the net but cant seem to find anywhere that sells spare parts.

 

Does anybody know where or do they have any? Thanks.

 

Its the Speed sharp 240v sharpener. i think its the same as the oregon ones.

[Jonesie]

Hi Rob if its the Oregon one I can get the parts for you. Take a photo and post it up and I'll see what I can do.

[RobRainford]

ok thanks jonesie. ill get some photos up tomorrow when im back in there.

[RobRainford]

heres the pictures, with a picture of the plate on the back too

 

[Jonesie]

Hi Rob

 

Have a look at these breakdowns there are a few grinders under the outdoor section, If you can make out what you need I can get it in for you.

 

http://www.oregonchain.eu/fileadmin/exploded/Exploded_views_12-08.pdf

 

[RobRainford]

Pn 23736a hand sharpener

39497 small screw

38654 big screw

38651 small screw opposite side

 

Bench grinder

Pn 106540

G003 fan cover

Price for motor g002

no part no. For fan itself

 

if you can make sense of that. That's what I noted down in my phone when looking through. There were no separate parts for any of the screws on the motor or for the fan itself. I would assume they come with the motor? If at all possible can you get a quote for the motor? Thanks

[Jonesie]

Pn 23736a hand sharpener

39497 small screw £1.21

38654 big screw £1.82

38651 small screw opposite side £ .80p

 

Bench grinder

Pn 106540

G003 fan cover £1.98

Price for motor g002 £104.19

no part no. For fan itself

 

The above parts would be a special order and may take a few weeks to get, so have a good look to see if there is anything else you may need.

 

Hope this is helpfull.

[RobRainford]

can you find out a price for a fan at all? if anything that is the piece i need most, along with the cover.

[josharb87]

justin, are the grinding disks universal?