makita dcs 6400

[petefran]

dont thing this is a dsc6400 piston is 45mm which is scrap label is missing all is left is TYP029 some pics can you lads tell me the model was made in 2001

[Dan Maynard]

Piston 45mm seems to make it a dcs5000. Pics of the whole saw would help.

 

I would have thought there's a number on the cylinder, maybe some of the other parts like crankcase which you can cross refer against possible saws.

[DCS6800i]

That's not a 6400 cylinder. The carb inlet is a circle hole on them. The bolt on plastic block which you have there, and the inlet shape is the same as what was used on the older dcs6000 and dcs6800.

 

45mm piston is also wrong. 6400/6401 is 47mm... DCS6000 is 46mm

 

 

Piston is toast, but is the cylinder Ok??

Edited November 20, 2021 by DCS6800i

[petefran]

yes the same as dolmar 6000 thanks you petefran

[Fatboy2017]

The Greek,  dandrikop  on ebay usually has pistons,  Meteor, good guy to deal with.