Jump to content

Log in or register to remove this advert

150 vtr track sliders


Joe d
 Share

Recommended Posts

Hi all , I have a problem with the internal plastic track sliders, does anyone know how to replace them without taking the whole tracking system off , somehow the securing plate holding them in place came off and the plastic inserts pulled out as the tracks were extended to their full width . Thanks 

Link to comment
Share on other sites

Log in or register to remove this advert

Hi Joe.  not an easy job anyways you do it. This is also a good time to give it all a good clean out as well though. Disconnect pipes at the tower valves, Jack machine up and put 4 axle stands under the machine's body, undo 10mm bolts so that the base hangs down . Disconnect cylinders and then the rams are exposed to slide out. If you would like to speak to our Timberwolf technicians give me a call . 01483 235111 Gareth of Green Plant.

Link to comment
Share on other sites

gareth , thanks very much for the advice , fairly big job for a few bits of plastic , I'll get some help from the local agri mechanic , usually kept them greased up but maybe haven't moved them in and out frequently enough causing them to seize ? I'll give you a ring if we struggle cheers joe 

9 hours ago, Gareth Phoenix said:

Hi Joe.  not an easy job anyways you do it. This is also a good time to give it all a good clean out as well though. Disconnect pipes at the tower valves, Jack machine up and put 4 axle stands under the machine's body, undo 10mm bolts so that the base hangs down . Disconnect cylinders and then the rams are exposed to slide out. If you would like to speak to our Timberwolf technicians give me a call . 01483 235111 Gareth of Green Plant.

 

9 hours ago, Gareth Phoenix said:

Hi Joe.  not an easy job anyways you do it. This is also a good time to give it all a good clean out as well though. Disconnect pipes at the tower valves, Jack machine up and put 4 axle stands under the machine's body, undo 10mm bolts so that the base hangs down . Disconnect cylinders and then the rams are exposed to slide out. If you would like to speak to our Timberwolf technicians give me a call . 01483 235111 Gareth of Green Plant.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.