TW 125 problem

[jamesw]

Hi everyone

 

My TW125 infeed rollers arn't working properly and was after some advice! It is a single feed roller. The machine gets up to full revs and the feed roller will reverse but not feed/go forward:confused1: Is this a fluid or electrical prob? has anyone encountered this before? Would take it to the dealer but need it working this week and can't really afford to have a few days down.

 

Cheers James

[Tom D]

Sounds electrical, faulty reset switch?

[jamesw]

Top box do you think?

[Tom D]

I used to have the entec version of your machine, I didn't experience the problem you describe, it just sounds like that would be the besty place to start.

[bob]

does it have a no stress bypass connector

tw 150,s have

but i would check top box and switches if not

[jamesw]

Cheers Tom and Bob

 

Its sorted now:thumbup:cheers for the help

 

It was the switch that works underneath the bottom push bar. It had snapped and stuck on. happy days and can get back to working this week

 

Thanks James

[bob]

Cheers Tom and Bob

 

Its sorted now:thumbup:cheers for the help

 

It was the switch that works underneath the bottom push bar. It had snapped and stuck on. happy days and can get back to working this week

 

Thanks James

 

always better to find the fault than it to just start working again:thumbup:

[jamesw]

was feeling stressed about it now and i can relax knowing that it isn't a bank breaker and i can get back to work without letting people down:001_cool: