Jensen A340 chipper

[dandkgroundcare]

has anybody used or have a Jensen A340 chipper just wondering what they are like as never used/seen one before

[hazzygawa]

we have a turn table one at our work. it is a great bit of kit, apart from a few snags.

1- most of the nuts and bolts tend to work loose at about 400hrs and fall out

2- the main prob- when feeding in brush it sometimes gets caught betwen the rollers up the side , jamming them open by about 2 inches. so you cant feed smaller stuff in until you have cleared the jam to close the rollers back together.

3- they tend to be quite messy, drop chip out from the rollers onto the floor.

4- still waiting for 4.

[dandkgroundcare]

just bought a turn table one so all the feedback i can get is helpful cheers hazzygawa

[john@arbtech]

just bought a turn table one so all the feedback i can get is helpful cheers hazzygawa

 

and they are numb as a herd of bulls! good quality, but over rated and very heavy

[dandkgroundcare]

tell me about it bought it now up for sale or swop for 6 inch to heavy for my truck

[john@arbtech]

we have a turn table one at our work. it is a great bit of kit, apart from a few snags.

1- most of the nuts and bolts tend to work loose at about 400hrs and fall out

2- the main prob- when feeding in brush it sometimes gets caught betwen the rollers up the side , jamming them open by about 2 inches. so you cant feed smaller stuff in until you have cleared the jam to close the rollers back together.

3- they tend to be quite messy, drop chip out from the rollers onto the floor.

4- still waiting for 4.

 

#4, parts are expensive, and some bits take time for delivery

[Mr Ed]

got any pics and a price?

[dandkgroundcare]

not much slows it down though used it all day today and auto feed kicked in twice chipper some big limbs:)

[fen01]

Bump!

 

I'm think of getting - oops wrong thread😀

[dave126k]

Any details pics price etc

Could px tw150?

Cheers