Stihl MS361C crankcase alignment

[Dan91]

Cheers spudulike, I didn't realise that's all that's involved. The crank does sit extremely close to the clutch side of the case but without using a feeler gauge I couldn't give a measurement. It's certainly not fouling. I wouldn't know what clearance it should have.

 

 

 

 

Sent from my iPhone using Arbtalk

[spudulike]

Cheers spudulike, I didn't realise that's all that's involved. The crank does sit extremely close to the clutch side of the case but without using a feeler gauge I couldn't give a measurement. It's certainly not fouling. I wouldn't know what clearance it should have.

Sent from my iPhone using Arbtalk

 

It is important to get the bearings pushed in as far as they should go and then to ensure the crank sits relatively central, more important on certain machines with crank stuffers with their built in thrust washers.