Jump to content

Log in or register to remove this advert

  • bigtreedon

    Review: ECHO DCS-2500T Review

    An incredibly capable tool for all manner of tree works

    PROs:
    • Low weight
    • Well balanced
    • Oil cap design
    • Chain speed
    CONs:
    • Battery life (solved by carrying spares)
    • Can bog down in larger wood

    When Steve asked if I would like to test and review the ECHO DCS-2500T I was very honoured and couldn’t wait to get my hands on it. As a predominantly freelance climber, I carry out a range of works, from big tree removals to smaller pruning works. As a result I rely on a selection of different sized saws depending on the job in hand. After seeing the stats for this saw on paper I was intrigued to see how such a small battery saw would stand up to the rigours of our job.

    I was contacted by a helpful lady from Echo to arrange delivery of the saw. Sure enough, a couple of days later a big box arrived and I eagerly unpacked it. I have had experience using some of the other battery powered arborist saws on the market so had a preconceived idea of what to expect. What I revealed what was at first glance, a very modern and brightly coloured little saw, and smaller than anything I had previously used.
     

    Initial thoughts on the ECHO DCS-2500T

    My first reaction when picking up the ECHO DCS-2500T was how light the saw was. and the ergonomics seemed spot on, with the top handle fitting perfectly into my hand. I particularly liked the design of the side handle, how it swooped from the front of the top handle to the back of the saw…this is a great design by Echo, both ergonomically and aesthetically pleasing!

    When putting the saw together i noticed that there wasn't a sprocket in the tip of the guide bar provided. I was initially concerned that this might hamper the saws performance but it didn't seem to! I turned the oiler up to max and waited for the first opportunity to put the saw to work!
     

    First use of ECHO's battery pruning chainsaw

    The first few times the saw was put to work was on some very small pruning cuts which it performed impeccably on! The narrow kerf of the bar and small chain pitch made for some very clean cuts that would almost rival a hand pruning saw. To my surprise the battery hardly seemed to be losing any charge during these initial works. I had been going easy on it, as due to only having 1 battery I wanted to make it last as long as possible. With plenty of power still left towards the end of the day I decided to give it a try on a small silver birch removal. Nothing too taxing there, just a few small limbs to remove and then a smallish stem to section down.

     

    IMG-20200707-WA0016.jpg


    With almost a fully charged battery still, I proceeded with the removal and mostly completed it with the exception of the last few remaining sections of the stem. I was somewhat restricted in only having one battery, and quickly realised the only way to work with these saws for a full shift would be with a minimum of 2 batteries and a nearby power source to charge them in-between turns.

    Over the course of the past 10 weeks I have had the pleasure of using this saw on all manner of tree works, from pruning to removals. It never ceases to amaze me how this saw manages to chop its way through larger diameter timber. The only downside is that this does drain the power pretty fast, and a sharp saw and light hand is needed to prevent the saw from bogging down. It would generally be my recommendation to move over to a larger saw before getting to this point, and keeping the ECHO for what it is meant for.

    One of my favourite features on this saw is the patented harness clip which makes the saw perhaps one of the easiest saws to stow that I have ever had the pleasure of using. This should be a standard feature on all arborist saws!

     

    IMG-20200625-WA0005.jpg

     

    My experience with the saw as a go to small pruner and possible small tree removal tool overall is that its a joy to use. The smooth, quick chain speed and overall weight of the saw really lowers fatigue. More importantly, as any climber will tell you thats been in the game long enough, wear and tear on your limbs adds up over time. Stress on your joints is significantly reduced with this saw and using it in preference to one of the traditional petrol top handled saws(on suitable jobs), will pay dividends in the long run! In the tree it almost removes the need to use a hand saw, which again saves energy and yet more fatigue. The added benefit of not having to pull start the saw is particularly nice, especially when on the extremity of a large limb. My shoulders and elbows almost felt like they were on holiday!

    Based on all the points above I wouldn’t hesitate to recommend this saw to any professional looking for a serious replacement to their petrol powered pruning saws.
     

    Conclusion

    In closing, don’t let the size of this saw fool you. Its an incredibly capable tool for all manner of tree works, and whilst it is fundamentally a pruning saw, it is more than capable of cutting through timber with a diameter equal to its bar length when needed. This saw has really made me realise what might be achievable long term in the battery chainsaw market, and I look forward to seeing what comes next from ECHO.

    • Like 3


      Report Review

    User Feedback




    Does anybody have an experience how ECHO DCS-2500T handles moisture/light rain/snow? HQ T540i XP declares  IPX4, but I did not found anything for Echo. I like the Echo ergonomy and weigth, but it seems the most electric saws do not like wet conditions...

    Share this comment


    Link to comment
    Share on other sites

    Thanks a lot. I've found some older online manual pdf 

    https://www.echo-usa.com/getattachment/3c17b4c8-fea2-4869-a000-e878b9fd3809/filev1_

    in the meantime, there was nothing about IPX4, but warning "Do not expose
    to rain / water", while newer seems to state this is IPX4.

    WWW.ACMETOOLS.COM

    Echo 56V 12" Chainsaw Bar & Chain 50.4V 2.5Ah Battery Powered Kit - DCS-2500T-12R1 from Echo

    One another thing that confuses me is that this picture says max 25cm/10" bar... while many sellers state this has 12" bar. Are there more version of this saw? I know there are 3/8" ad 1/4" - do they differ in max bar length? I know its subject to change, but still confusing.

     

     

    Share this comment


    Link to comment
    Share on other sites

    1/4 is much better on this saw.

    10" bar length to me makes sense and works for the saws intended use.

    Share this comment


    Link to comment
    Share on other sites

    42 minutes ago, covex said:

    Thanks a lot. I've found some older online manual pdf 

    https://www.echo-usa.com/getattachment/3c17b4c8-fea2-4869-a000-e878b9fd3809/filev1_

    in the meantime, there was nothing about IPX4, but warning "Do not expose
    to rain / water", while newer seems to state this is IPX4.

    WWW.ACMETOOLS.COM

    Echo 56V 12" Chainsaw Bar & Chain 50.4V 2.5Ah Battery Powered Kit - DCS-2500T-12R1 from Echo

    One another thing that confuses me is that this picture says max 25cm/10" bar... while many sellers state this has 12" bar. Are there more version of this saw? I know there are 3/8" ad 1/4" - do they differ in max bar length? I know its subject to change, but still confusing.

     

     

     

    Glad to help :)

    The US and non-US versions (and certifications) usually differ, hence the differences in certified bar manufacturers and lenghts as there are some differences in requirements and testing procedures.

    Originally this chainsaw was designed around A4S chain hence it performs the best with narrow gauge 1/4".

    The 3/8" laminated Tsumura is somewhat  "budget" version.

    Here are the official sizes from catalogue (20cm is 8", 25cm is 10"):

    image.thumb.png.5ea6ddf18627a443163b61fa555f5eb3.png

    Edited by Piston Skirt

    Share this comment


    Link to comment
    Share on other sites

    Hi and thanks for all the positive info' as I have recently bought the Echo 2500T. Does anyone have any problem with the battery with one charge light remining? Basically I can't run the battery out and can't totally discharge it as it keeps cutting out, even if I am just revving it without trying to cut a limb, the on/off light blinks, then when i turn the saw on again and rev it for a couple of seconds, it stops and the on/off green light flashes. I can keep doing this until i am fed up with trying to get the last light to go out. So far haven't succeeded. Thanks for any thoughts.

    Share this comment


    Link to comment
    Share on other sites

    16 minutes ago, Coppicing Fan said:

    Hi and thanks for all the positive info' as I have recently bought the Echo 2500T. Does anyone have any problem with the battery with one charge light remining? Basically I can't run the battery out and can't totally discharge it as it keeps cutting out, even if I am just revving it without trying to cut a limb, the on/off light blinks, then when i turn the saw on again and rev it for a couple of seconds, it stops and the on/off green light flashes. I can keep doing this until i am fed up with trying to get the last light to go out. So far haven't succeeded. Thanks for any thoughts.

    There’s no need to kill the battery. When it’s low. You should recharge it. If it’s lithium it will prefer to be kept charged. Or so I’ve been told on many occasions.

    Share this comment


    Link to comment
    Share on other sites

    I'd check the manual too, I looked at my Makita one and the lights are

    1 light - 0 to 25%

    2 lights - 25 to 50%

    3 lights - 50 to 75%

    4 lights - 75 to 100%

    Once it's at 1 light it won't really cut, sounds like yours. In fact heavy cuts not as good with 2 lights on.

     

    This seemed a bit counter intuitive as you can't see the difference between a full 100% battery and a 90% battery, but I guess if the top light was actually only for 100% then it might not turn on when the battery is a bit old.

    Share this comment


    Link to comment
    Share on other sites

    On 12/03/2024 at 12:34, Coppicing Fan said:

    Hi and thanks for all the positive info' as I have recently bought the Echo 2500T. Does anyone have any problem with the battery with one charge light remining? Basically I can't run the battery out and can't totally discharge it as it keeps cutting out, even if I am just revving it without trying to cut a limb, the on/off light blinks, then when i turn the saw on again and rev it for a couple of seconds, it stops and the on/off green light flashes. I can keep doing this until i am fed up with trying to get the last light to go out. So far haven't succeeded. Thanks for any thoughts.

    That's just low battery, swap batteries when that starts happening. 1 light is the lowest indicator, it does not go to zero lights to display no battery remaining

    Share this comment


    Link to comment
    Share on other sites




    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.