Gez28

Did take a few pics, the wiring diagram that came was spot on tho! Best service I've had for ages! Was here within 24 hours!

Had a look today turns out solanoids were no good. Ordered new ones from good winch and will be here tomorrow!

Was just looking at the parts on his site, goodwinch?

Does anyone know somewhere reliable to repair a super winch? Just bought a second hand huskythats been standing to go on our truck but think it needs new solanoids and a going over to check it. Thanks

Does anyone know of any cord or arb waste available in north wales or Cheshire area? For processing into logs. Thanks

I'm thinking of building myself a trailer to tow mostly behind a 12 ton wagon and sometimes a 4x4, So will be 3.5 ton max . Will most likely be twin axle so the big question is what axles would everyone recommend? I want something with strong tyres as trailer punctures drive me mad! Don't want a really high bed either, will be around 16-18 ft long and 7ish wide. Thanks

I've had this problem on 2 colorados a 98+99. They both turned out to be blocked rads in the centre, Flow was fine at lower speeds but couldn't hack it working harder!

I've ended up with a stihl hs85, 2nd hand but had it quite cheap with a blower I hope. Still not decided on a mower!

I've seen a second hand hs85 but never used a single sided one, is there much difference in using them?

I've always had Stihl and husky chainsaws, I'm not sure on the newer brands I hate new stuff that's unreliable. I can get a hs45 for £200 new if that sounds about right.

Are the Stihl hs45 really that bad? They don't look bad for the money?

What other makes of hedge cutters are worth looking at apart from sthil, I think I'd prefer decent second hand gear to poorer new stuff. Have been looking at the izys they like to rust!

As tittle really, Had a few hedges to trim and cut down lately with a friend who has some old stuff, So after some recommendations on a hedge cutter not mega money ones really but something that will last. Going to start doing some lawns etc as well so was thinking a second hand Honda would do me. Thanks

What sort of cost for an artic full? I'm not to far from Chester.

Wot sort of cost would a load be to north Wales? Ch8 post code. Abit far maybe.