Ronald

On 09/08/2020 at 20:46, Gray git said:

On 03/08/2020 at 13:58, Ronald said:

Grinding some stumps with the bigboy! Pictures from last year during a video sesion. Herder-Fermex SC-800H, suitable for tractors between 180 and 250 HP.

Read more  

Amazing reach on that, bet it can bounce a bit if you overbight on the cut.

If the machine is properly supported on its support legs there is hardly change of bouncing. This is due to a combination of; high weight of the arm incl. cutting head, the high swing mass of the (big diameter) cutting wheel and the high torque/horse power on the cutting wheel.  

Grinding some stumps with the bigboy! Pictures from last year during a video sesion. Herder-Fermex SC-800H, suitable for tractors between 180 and 250 HP.

Here a nice video of a Liebherr 914 working with a Herder-Fermex stumpgrinder (model SCE-630H): 

For more information and/or specifications, please visit: 

or email us at: [email protected]  

I drove this New Holland T3.70F during a day while making a demo video of the mounted Herder-Fermex stumpcutter. I must say it is a nice tractor to run and easy to operate. I found the mirrors vibrating a little anoying, but for the rest a nice tractor.

This is also a way of removing stumps with an excavator. more information to find here: https://www.herder.nl/en/herder-fermex-stump-cutters-for-excavators/ 

You might consider the Herder-Fermex SCT-410H is approx 31" but grinds deep and has a big sweep, here you find a review of it: 

If you like, you can contac Nick Curry as well. He runs this machine for almost 2 years very intensive and he can give you answere on most of your questions I am sure. You also can contact me via email: [email protected] 

Here a Hitachi Zaxis 130LCN in belgium during commisioning together with a Herder-Fermex stumpcutter (more info: https://www.herder.nl/en/herder-fermex-stump-cutters-for-excavators/ )

Used of new? if interested in new (like in this video: https://www.youtube.com/watch?v=LPL1equ5uFM ) just send me an email: [email protected] and I bring you in contact with our U.K. Importer.

Kind Regards,

Ronald

I'dd like to bring the Herder Fermex SCT 410H to your attention. Here a small movie: 

and here a review of one of our UK customers:

And a movie of this particular maschine: 

If you want more info, please send me a PM

I don't know what your budget is, and if you consider a 2nd hand selfpropelled machine? one of our german dealers has a refurbished model on stock:

https://www.hafera.de/gebrauchtmarkt/herder-fermex-scw-410h/

This is the older model which is 89cm wide (the current model is only 79cm wide)

He doesn't speak english, but nowadays google translate can help you out...

On 17-10-2017 at 08:13, jonnygurkha said:

 

What make of stump grinder is that Gray Git? Wonder what HP the Alpine is?

 

Hi Jonnygurkha,

The Stumpcutter is a Herder Fermex (http://www.herder.nl/en/herder-fermex/ ), the tractor is a 96HP Valpadana.

Here a link to an other topic where this Alpine is shown.

https://arbtalk.co.uk/forums/topic/92214-alpine-tractor-which-make/?page=9&tab=comments#comment-1508821

Takeuchi excavators are know for their Hydraulic power!

Various attachement have different flow's, so it is good to check the requirement of the attachements.

Are you still in need for attachements? we, www.herder.nl have several attachments in our product range. our UK dealer, DOW (http://www.woodfuelmachinery.co.uk/ ) will be on the CONFOR exhibition and showing/demonstrating a tree shear and a excavator mounted stumpcutter.

Standard color, but action!

[ATTACH]222443[/ATTACH]

Who likes this special color?

[ATTACH]222441[/ATTACH]

[ATTACH]222442[/ATTACH]

[ATTACH]222332[/ATTACH]

[ATTACH]222333[/ATTACH]

Here the HERDER FERMEX SCW410H during a demo. This 32 horse power machine is available as a 3 Wheeled machine (extremly manouvrable), a 4 Wheeled machine or with tracks:

[ATTACH]222334[/ATTACH]

[ATTACH]222331[/ATTACH]

Here the HERDER FERMEX SCT550H with 75 horse power during a demo

[ATTACH][ATTACH]221644[/ATTACH][/ATTACH]

The Herder Fermex SCT630H with only 33.5" width with tracks retracted but still 110 HP! Comes in handy when having tight access.

Any chance of a demo in Southampton?

No problem, I send you an PM.

Looks a nice machine and I like the joy stick controls. Kubota engine?

 

Sent from my SM-N910F using Arbtalk mobile app

No, this model runs a Lombardini FOCS engine.

gives 32HP on the RPM we use it..

Regards,

Ronald

I have a predator 450 but am thinking of adding something with significantly more power.

 

We do a lot of stump grinding in built up areas where garden access is through 2'6'' gates. In reality this means about 2' 5'' absolute maximum.

 

The only thing I have seen that fits these requirements is the 38HP predator.

 

I am going to get a demo from them fairly soon but wondered if there is anything else which fits the bill. Also I've had reassurances from Predator that the early problems have been resolved -

do owners agree with this?.

 

I've read through the stumpgrinders thread but still can't see an alternative.

 

The Jo beau looks neat but not much more power and quite wide, I like the build quality on Carltons and Vermeers but again... wide.

 

Come on you salesmen - what am I missing?

Hi All,

an old topic, I know, but hopefully not too late:

I'dd like to bring our machine to your attention: Herder Fermex SCT 410H, as recently shown to the ARBshow.

This machine has a width of only 31"! and with its high torque 4 cilinder diesel engine (32HP) it's has a high capacity. We did run it against a 44HP (also diesel) machine and (also the customer decided) it has simular capacity.

Might be worth looking at it... also available as a wheeled machine...

Here our website:

Herder-Fermex - Herder

And our YouTube channel:

[ame]

If anyone wants some info, just send me a PM.

Kind Regards,

Ronald

Evening all,

 

Currently looking to upgrade the grinder and was set on the Toro STX-26 (34" wide) until I spoke to Dean at the show and realised that the ZT1844 (29" wide) won't break the bank.

 

Lost count of the number of jobs where we're scraping the tyres at 30". Taking the gate off is fine until it's brick walls etc.

 

The HB20 and JoBeau B24-100 are down to 25" but I'd rather have a track machine with a lot more power.

 

There's also the Predator 28x at 26", expanding tracks and a price tag to match.

 

So, how many jobs would you be able to get a 25" machine in where 29" is too much? Or am I over thinking this?

 

 

Regards,

 

Steve.

Hi Steve,

I'dd like to bring our machine to your attention: Herder*Fermex SCT*410H.

This machine has a width of only 31"! and with its high torque 4 cilinder diesel engine (32HP) it's has a high capacity. We did run it to a 44HP (also diesel) machine and also the customer decided it has simular capacity>

Might be worth looking at it... also available as a wheeled machine...

Regarding your question on colour; the Herder Fermex comes standard in RAL 1028 (yellow). Optional we can suplly them in different RAL colours. Normally delivery is longer for special Colours

Here our website:

Herder-Fermex - Herder

And our YouTube channel: [ame]

Just give me a PM if you want more info.

Regards,

Ronald

Hi Ronald - impressive kit. 3 main things:

 

1. The site is not written by a native English speaker so it's losing a lot of potential persuasive impact
   
2. There are just too many words - it needs thinning / editing throughout - stuf like 'H... assures the highest quality, the best results' is filler - it falls into the category of 'I should hope so' - if I have to read too much of that sort of stuff I may just give up
   
3. You're slightly overdoing the 'we' throughout the site - get the focus back to 'you' (your customer's problems)
   

Hope that helps

Hi Mikerecike,

Thanks for your comments.

on point 1, you are totally right. I didn't realise the "size of the impact", but as said, thanks for letting us know. I will ask "native english speakers" to review the translations and try to improve the texts.

I also will bring the other 2 points under the attention of my collegue who is responsible for the website.

Regards,

Ronald

Nice pics. Not heard of that make stump grinder before. Dutch company?

Yes, it is a Dutch brand. The brand exists over 30 years, but was never active in the U.K. (as far as I know). We, Herder b.v., took over this brand 6 years ago. First we re-designed all models and now we are introducing the brand on the U.K. market.

We do have tractor mount models, excavator mount models and both tracked and wheeled diesel powered stump grinders.

Here you will find an overview brochure: http://www.herder.nl/wp-content/uploads/2016/01/Stump-cutters-ENG-PDF-04.pdf

Kind Regards,

Ronald

Here the bigger brother, the SC 630H pto

suitable for tractors between 100 and 150 HP

My favourite... I will look up some other pictures soon!