Dave177

Looking to hire a chipper that will produce good quality G30 grade chip a few times a year, trying to find anyone that has one that they hire out and average prices and outputs per day?

Thanks

thanks, I have worked it out like that in the past, just wanted to check it was correct and see it there was a shorter way of calculating, guess ill jut have to keep the calculator handy

does anyone know an easy way of calculating the cubic meter of cordwood? I know 8x4x4 is roughly 2.4 meters.

but what if I have different sizes such as 6ft length?

Cheers

I sent it away to be rebuilt by the guy that advertises on E-bay. I think I will try the rubber fuel hose as it is quite cheap.

sometimes it starts, sometimes it doesnt when cold, it will rev up but idle badly and then stall and usually not start when warm

I want to rebuild my Ms200T as its starting to play up, not starting, bad idle ect, i have allready changed, plug, filters and had the carb rebuild by somone. im guessing all thats left to change is:

fuel pipe

piston and rings

Anything else I should look for? What additional bits do I need if I am changing piston and rings?

David

Cheers, would requiring longer drying affect price? would waiting till autum be better?

Cheers

Hi guys,

I have a felling job coming up this summer of about 10-15 oaks, proably around 60-80cm DBH (a guess as I havent measured) all would be naturally woodland grown.

any ideas of price to be expected per cubic metre/foot? and secondly any ideas of buyers, the site is around 10mins north of Gatwick Airport and it would need to be collected from roadside.

Thanks

David

Hi guys, took the handle off my 200t today to fix the on off switch ( wire came off), when I was reconnecting it my big clumsy hands knocked everything else out of the handle. I have managed to re attach all the linkages however there is no distinct difference between choke, half choke and on.

any ideas what I might have done? Im assuming something to do with the metal springs but no real idea?

Cheers

Cheers, sounds like it will be ok then, does anyone have a link to an exploded diagram of one?

Cheers

I have been offered a fransgard 6000 winch with a faulty clutch,

Can anyone tell me the spec of the winch ie. strength of pull,Hp required and approximate model age, secondly how hard replacing the clutch is and if spares are available

Thank you

Hi, Im after a tractor with a forestry winch or a low ground pressure forwarder for one days hire near Hindhead. I need to extract around 75-100 60 year old larch trees in length off a steep slope. The drag to the top where the timber will be stacked is probably no more than 50m long.

Im happy to hire with or without an operator just need to find one.

if anyone has any other suggestions then im all ears.

Cheers