Breton monkey

<p>Hi Neil,</p>

<p>I would normally tach the saw to around 13,000rpm (500 off max) after fitting but in your case, you may not be able to do this so would recommend turning the H screw out around 1/8th turn, fire the saw up and check it fourstrokes when flat out and then check the plug has a tan coloured electrode after an hours use.</p>

<p> </p>

<p>If it is white or grey, richen the H screw again until tan but this is unlikely unless you have other issues.</p>

<p> </p>

<p>Cheers</p>

<p> </p>

<p>Steve</p>