Jump to content

Log in or register to remove this advert

J.D

Member
  • Posts

    262
  • Joined

  • Last visited

Posts posted by J.D

  1. If they are timber posts then sit them on some levelled strategically placed breeze blocks and brace the post to the subframe with timberlock screws/bolts or you can but a "shoe" type bracket that the post sits in that you concrete into the ground, think Simpson tie make them ?

     

    Be careful if you nail as these will rust and discolour the boards !

  2. Bump for a lovely Caravaners night :)

     

    Well I bought a Static on the Coast and I have to say it's awesome, apart from the cold mornings and nights we've been having lately of course, my lad loves it to. Thanks for all the advice etc lads.

     

    I'll be adding a solar panel when I build a shed in the next few weeks and might even add a burner later in the year too.

     

    JD

  3. Morning Folks,

     

    What kit do I need to setup a Satellite system for the Euro stuff and what would I expect to pay in subscriptions etc, the system is for my caravan which wont be moving far so it doesnt have to be portable etc, expect a fair few questions on this as I havent a clue where to start.

     

    Cheers all.

     

    JD

  4. Er, it's all here :confused1: Unless your L200 is the new one?

     

    I thought it was different mate, on checking it's the same though :blushing:

     

    Been under the truck today and its all solid enough, was covered in mud under there though, so all cleaned off, u/ joints and other nipples greased, but i need a bit more time to check the universal joints on the driveshafts for play and the oil levels in the diffs etc.

     

    Hopefully one of these will sort it, checked the rubber / metal bracket and it seems fine, no perishing of the rubber etc ?

     

    Cheers

     

    JD

  5. Hi, whilst searching google for an answer to my L200 clutch / driveshaft judder I came across a couple of pdf's form this forum and wondered if some kind soul could help me out with diagnosing the problem ?

     

    When setting off in first or second i get varying amounts of juddering depending on how long the vehicle has been used for that day and how many revs I use ( more giving less vibration )

     

    Is this a drive shaft uv joint or similar problem or is the clutch goosed ? has anybody come across this before or know of this problem, any advice much appreceiated.

     

    JD

  6. Sorry to hijack the thread a little but which CSCS cards do you lads have if any ?

     

    We are looking to get onto site and need the relevant cards for Decking and Fencing, so I have phone Lantra etc and I'm still not sure if we need FISS or what the hell ?

     

     

    Cheers

     

    JD

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.