Jump to content

Log in or register to remove this advert

Any tips for adjusting TreeMotion?


onetruth
 Share

Recommended Posts

I tried out a TreeMotion in the shop - felt unbelievably comfy. The previous occupant must have shared a similar body shape to me, but it never occurred to me to measure the bridge or strap lengths.

 

I've had one for a couple of weeks now and just can't seem to replicate the feeling. It's either hurting my hips, pushing/pulling me from/into my system, or trying to turn me into a eunuch. (I'm the sort of person who has trouble working out which hole I should use on a belt or how tight I should pull my shoelaces). I've fiddled with the bridge, thigh straps, etc. I can tell it feels different each time, but not whether I'm going in the right direction or not. I don't really have a spare week in which to keep trying random settings until I fluke a good fit.

 

My old butterfly felt lovely and had a fixed bridge length, so I've copied that for now but as the harness is significantly different I suspect there must be a more scientific method. I have read the manual.

 

So... any tips on getting the right fit would be much appreciated.

 

What sequence should I be making the adjustments in, and what should I be aiming for at each step?

Should I be thinking in terms of angles/proportions when setting up, or is it all about how it feels (subjectively) when suspended?

Where would sensible starting positions be before I start adjusting? (I'm 5'11", slim, long arms)

 

Thanks!

Link to comment
Share on other sites

Log in or register to remove this advert

Not really a scientific method, but with my first one I just tried to set it up so as i was free hanging there seemed to be equal pressure on the back pad and leg loops. I shortened the bridge with a quick over hand knot at one end.

 

The second harness I just copied the setup and then taped all the loose bits down.

Link to comment
Share on other sites

i fit the legs first so i can squeeze my fist in between the loop and my leg. Then sit in it and wind the upper straps in until i am sat as upright as i want. Then usually shorten the bridge about 4 inches.

Link to comment
Share on other sites

Thanks for taking the time, gents. Those were just the sort of suggestions I was after.

 

I will try the following:

1. Shorten bridge 4", fully loosen top straps.

2. Set leg loops so I can just squeeze my fist in.

3. Tighten top straps till at suitable angle.

4. Gradually adjust bridge and top straps till comfortable while maintaining angle.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.