Sugihara carving bar offer - buy 1 get 1 free only while stocks last....

[Rob D]

OFFERS | Product Categories | Sugihara Guide Bars

 

 

We are ending arbtalk offers now where people have to put codes in etc and switching to doing special offers within arbtalk. Some of these will be like this one with it's own thread - and some will be peppered within existing threads.

 

 

The idea is that those who are participating in the thread will then have easier access to the offer.....

 

 

Some offers will only be publicised on arbtalk.

 

So what's this one then?

 

Well last batch of Sugi carving bars it seems the noses are of different sizes. On the whole a dime tip carving bar will be R9 (the radius of the nose is 9mm) and quarter tip bars will be R13 (radius of the nose is 13mm).

 

But the last batch has bars with noses that measure inbetween these. All of these are fine to run 1/4" pitch chain - but really we want the dime tips to be 9mm and quarter 13mm.

 

[ame]

[/ame]

 

So the R stands for what radius the nose of the bar is.

 

So we have arranged with Sugihara to do a deal on the ones that don't fit these measurements - buy 1 get 1 free! Unlikely to ever be repeated so dive in and gorge on the carving bars found here.

 

Only these ones are on this offer!

 

They are universal mounts and will run on any and all chainsaws 40cc or less fitted with a 1/4" drive sprocket.

 

OFFERS | Product Categories | Sugihara Guide Bars

 

 

Not got a saw to run a carving set up? Why not buy one of the new CS281-WES? Hot price of £180-00 for saw only with 1/4" drive sprocket - then buy your carving bars to go on there.

 

 

See how to care for your bar and adapt your chain - you can increase the life of your bar massively by correct use and maintenance... you need to look after your bar to get full use out of it.

 

Simon O'Rourke made this vid recently [ame]

[/ame]