Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Hello all,

 

I think I have a fault with my spider jack 2.1, after reading a few threads and searching the net I thought the best thing to do is see if anyone else has had the same problem as me.

 

The problem: The spiderjack is not loading under weight.

 

My spiderjack is set up correctly as the specs and diagram shows in the hand book, it loads when I am static on the ground but as soon as I start to climb its just doesn't want to load. I can load it manual by brining my rope up as if I was stopping a slipping prusk but even then it still likes to slip.

 

It would be greatly appreciated if anyone can give me some feedback or help.

 

thanks

Jamie

Log in or register to remove this advert

Posted
Hello all,

 

 

 

I think I have a fault with my spider jack 2.1, after reading a few threads and searching the net I thought the best thing to do is see if anyone else has had the same problem as me.

 

 

 

The problem: The spiderjack is not loading under weight.

 

 

 

My spiderjack is set up correctly as the specs and diagram shows in the hand book, it loads when I am static on the ground but as soon as I start to climb its just doesn't want to load. I can load it manual by brining my rope up as if I was stopping a slipping prusk but even then it still likes to slip.

 

 

 

It would be greatly appreciated if anyone can give me some feedback or help.

 

 

 

thanks

 

Jamie

 

 

do you load it quickly or gently?

 

you need confidence and have to sit back for it to bite, if your doing it gingerly it won't grab.

 

just a thought.

Posted

Same as Ian said. If you gingerly try and sit back in it, it won't grab. Have trust in the equipment (low and slow) and let go of your rope. It should grab nice and sharp.

 

Sent from my GT-I9300 using Tapatalk

Posted

Thanks for all of the replies, ill post a picture of my setup tomorrow when I am out.

 

ill give the sharp let go a shot tomorrow, I believe I haven't been doing that, because I have been unsure on the fact that it wasn't loading once Im off the ground.

 

looking forward to trying it, hope it works as I quite the spiderjack.

 

also it is brand new.

Posted

Hello just a quick update.

 

I have tryed the fast realese of the rope, it is loading nicely now.

thanks for all comments and advice.

 

If you still want a picture of my setup ill upload it.

Posted

it's it's brand new it might take a little use to bed in too

 

get used to loading it quick from not very high up and get your confidence up, it'll soon be second nature to you, enjoy your spider jack!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.