Jump to content

Log in or register to remove this advert

flying fox setup?


Hollands
 Share

Recommended Posts

Anyone know how to setup a good flying fox? I want to be able to take my kids to the park and set one up. I thought about going through a grigri at the base of the tree (so i can raise it up or down) and up through a pulley and then across to the other tree. Not sure how to attatch it at the other end (just a knot?) and how to back it all up. Any thoughts greatly appreciated. Also not sure how i stop them from slamming into the other tree.

Link to comment
Share on other sites

Log in or register to remove this advert

hey bro we just set one up in town. tied to a plane tree on top of the hill and attached the bottom to another tree through a fiddle block at the bottom. as a brake we attached some slings with fall arrest bungys at the last ten and 5 metres. the fox was about 85m long, it worked sweet.went down ona petzl tandem pulley though i reckon any pulley would do really. think theres some pics on facebook

Link to comment
Share on other sites

Chur bro. Saw some pics on there. Could'nt really see how the setup worked, looked like a bit of fun though. Have'nt actually seen those bungees mate, but fiddle block sounds good for gettin it all tight. Did you back it up with anything? Was it just tied straight to the top tree? Hows the weather up there? I've heard its a bit wet

Link to comment
Share on other sites

Here's our local flying fox set up. talk about hardware.

[ame=http://www.youtube.com/watch?v=rzg2dHJ_OzE]YouTube - Hollybank Treetops Adventure[/ame]

Forestry getting people into the trees.

Edited by Rob Murf
Link to comment
Share on other sites

tried to set one of those up the other day using an old climbing line as the zip line and two micro pulleys to go along the line, one as a back up. to control descent we treated it as you would when rigging a speed line but used it just to decellerate the climber at the end of the zipline. We also stuck a dolly on the line to tension it so when the climber hit that knot they were brought to a halt, albeit a bit suddenly.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.