346xp carb settings?????

[PC tree]

Is there a factory setting for it as I am giving it new plug and filters.. Just wondered if it would benefit a tune up and wondered how to go about it??

Cheers

[spudulike]

Is there a factory setting for it as I am giving it new plug and filters.. Just wondered if it would benefit a tune up and wondered how to go about it??

Cheers

 

One turn out from fully in If the limiters have been removed. If they haven't , unless you have a tach and know how to use it then leave well alone unless a fault is suspected.

 

If the saw has a blue limited coil, care should be taken in tuning the saw.

[PC tree]

Thanks for that Spud, are you local???

[PC tree]

No just checked !

[PC tree]

Oh it's 2010 model if that makes a difference. Is that one full turn on both screws ??

[spudulike]

Oh it's 2010 model if that makes a difference. Is that one full turn on both screws ??

 

Yes, ignition the limit caps are off.

[SawTroll]

Oh it's 2010 model if that makes a difference. Is that one full turn on both screws ??

 

Provided the limiters are removed, yes.

 

Be aware that is just the starting point, fine tuning still remains!

[spudulike]

Yes, ignition the limit caps are off.

 

Bloody predictive text......if the caps are off!

[PC tree]

Provided the limiters are removed, yes.

 

Be aware that is just the starting point, fine tuning still remains!

 

 

Is that a "by experienced ear" thing????

[Cut4fun]

If NE 346 50cc it will have a rev limited coil around 14.1k (unless somebody changed it). Beware it may not be 4 stroking you are hearing.