Main needle 268xp

[urbandekay]

Hi, anyone have a photo or accurate line drawing of main jet needle for a Husky 268xp?

 

Many thanks

[spudulike]

Hi, anyone have a photo or accurate line drawing of main jet needle for a Husky 268xp?

 

Many thanks

 

That's got to be one of the strangest requests:confused1:

 

If you have a saw that needs a new needle in the carb, it is a Tillotson carb Tillotson HS-134A, 234A, B, 260 series -

 

http://s30387.gridserver.com/partsDiagrams/Husqvarna%20268.pdf

 

If you want spares - Rowena Motors - don't let the website put you off, they are top guys and you can purchase by mail and paypal request.

[urbandekay]

thanks, trouble is in the parts diagram the shape shown for the needle is different to the one in my saw, which I suspect may be wrong. In fact the shape looks the same as that in a Husky 61. Furthermore that is the parts diagram for a 268 not 268xp, though whether there is likely to be a difference in needle I know not

[spudulike]

thanks, trouble is in the parts diagram the shape shown for the needle is different to the one in my saw, which I suspect may be wrong. In fact the shape looks the same as that in a Husky 61. Furthermore that is the parts diagram for a 268 not 268xp, though whether there is likely to be a difference in needle I know not

 

The carb will have a number on its side, go by this - it should match one of the numbers I have given you. If it doesn't match then you will need a replacement carb or take a chance and see if it will work - most Tillosons I have worked on have had a long needle - perhaps 15mm long.

 

Good luck

[spudulike]

Try this IPL - 272 - 268 - XP Planche éclatée, IPL

[urbandekay]

Cheers, will get the number and check it out

[SawTroll]

268xp 1990-05