vermeer super teeth, used, need new home.

[Rupe]

I Have a bag of used vermeer super teeth sitting around getting in the way. I think there is at least two sets of teeth plus a few extras and all the pockets and bolts etc.

 

Would cost a bit to post due to the weight but it can be done.

 

Happy to split them. So if anyone needs a few teeth, or one set, or set of pockets and bolts (rather not split them, the whole set is probably more useful) then please let me know.

 

The teeth are all well used and have been sharpened a few times but could be sharpened again.

 

If not I'll weigh them all in one day, if I get round to it.

[ratcatcher]

I could do with new teeth, will my dentist be able to fit them?

[ukminch]

Stupid question time will these fit on my Carlton grinder? It's got finger teeth on at the moment.

 

R

[Breezeblock]

most grinders use 1 1/2 hole centres and 5/8 unf bolts are these the same

[Rupe]

I really don't know. The pockets bolt on through two hole in the cutter wheel.

 

What are the chances that your holes are the correct distance apart and the correct distance from the edge of the wheel? Slim I would say!! I'll measure it of you want? Super teeth Definatly better than finger teeth.

[Rupe]

most grinders use 1 1/2 hole centres and 5/8 unf bolts are these the same

 

I posted before I read this.

 

If that's true about the 1 1/2 centres then they might fit. Bolts are not an issue as I have all the bolts.