Jump to content

Log in or register to remove this advert

What chain ??

Brownlie1985

By Brownlie1985,
in Chainsaws

 Share

Recommended Posts

Brownlie1985 Enthusiast

Brownlie1985

Posted
  • Author
Posted
If you count the drive links you can pick any chain here Custom chain loops

 

 

If you're not sure which part are the drive links they are the bits that sit inside the bar... and there are links on the above page to help ID the chain you have,

 

 

 

:001_smile:

 

yeah I know that, its 50 drive links.

 

Was just looking for opinions on type of chain and chisel type etc.

 

Cheers

 

Mike

 

Sent from my GT-N7000 using Tapatalk 2

Link to comment
Share on other sites

Log in or register to remove this advert

morten Mentor

morten

Posted
Posted
Sorry to hijack the thread but does anyone know if you can get skip tooth chain in 3/8 .063 in the uk ? Or rob could you possibly make one up?

 

If you know you are hijacking the thread, why do it? :confused1: Why not just create a new post?

Link to comment
Share on other sites
morten Mentor

morten

Posted
Posted
yeah I know that, its 50 drive links.

 

Was just looking for opinions on type of chain and chisel type etc.

 

Given the fact that you (probably) have a 1.1 mm (0.043") kerf bar, you will not have much choice. It's semi-chisel or semi-chisel (Stihl or Oregon). And given those choices, I doubt anyone would recommend anything but Stihl!

 

If you want to have the choice of full chisel, you'd need a 1.3 mm (0.05") kerf bar, which would be 12" (or longer).

Link to comment
Share on other sites
Brownlie1985 Enthusiast

Brownlie1985

Posted
  • Author
Posted
Given the fact that you (probably) have a 1.1 mm (0.043") kerf bar, you will not have much choice. It's semi-chisel or semi-chisel (Stihl or Oregon). And given those choices, I doubt anyone would recommend anything but Stihl!

 

If you want to have the choice of full chisel, you'd need a 1.3 mm (0.05") kerf bar, which would be 12" (or longer).

 

It is 1.3 mm at the moment.

 

 

 

Sent from my GT-N7000 using Tapatalk 2

Link to comment
Share on other sites
morten Mentor

morten

Posted
Posted
It is 1.3 mm at the moment.

 

 

 

Sent from my GT-N7000 using Tapatalk 2

 

OK, if the question is about semi-chisel vs full-chisel on a top handle saw (I guess it's not a Stihl or Husqvarna, given it's 10" 1.3 mm/0.05"), have a look at this thread discussing the subject (after the Stihl MS201T started shipping with full-chisel chain) http://arbtalk.co.uk/forum/chainsaws/31191-new-ms201t-chain-what-do-you-think.html

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  •  

  • Featured Adverts

  • 9
    Lev Community

    Arb Chip Wanted

    726
    Tony Croft aka hamadryad

    Pollards, the forgotten art-discussion

    0
    Lev Community

    Arb Chip Wanted

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept