Rayco 1625 super junior (3 wheel model)

[jacko]

Just had a belt problem on my Grinder, the main cutter head drive belts slipped, i re fitted them but one seemed to be slightly longer than the other, instead of stopping in the middle of a job i tried to continue grinding, bad idea, both drive belts flew off and snapped in the process destroying the drive belt from the hydraulic motor!

My problem is that without an owners manual i have only a few bits of belt left without any indication of numbers.

So is anyone out there familiar with this model and can they supply me with the relevant seriel numbers for replacement belts.

Cheers.

[Hodge]

Get on to Westcon Equipment, they are Rayco dealers and have a good stic of parts and are helpfull. 01258 859100 give them a call.

[jacko]

Cheers, was actually hopeing someone on here might have the part numbers as i have a local belt and bearing supply company.

[chipper wallah]

Hi Jacko

Ive got the three wheel model but its got a three in one belt if it helps heres the info,goodyear 3vx900 its like 3 belts fixed side by side.If you need advice Malcomb at wescon as Hodge says is the man.