R M International Forwarding Trailers???

[TimberCutterDartmoor]

Just went and looked at an old motor, the plate says 4KW, so it should run off a 8kva gen.

The conveyors have a smaller motor.

I'm no electrician, but I think it should be OK.

I've asked the factory to double check the motor sizes on the saw/conveyor.

I could try and get a photo of the motor plate if you've got an electrician friend who can say for sure (and tell me so I know for the next time someone asks!)

 

Its either that or I have a petrol saw in stock.

 

Thank you; yes if BalFor could clarify that would be great; I have a multi output genny (high end) with 1 x 240 and 1 x 415 output, the latter being 8.8 kVa...

[TimberCutterDartmoor]

Pre-order of the 700 saw with conveyor please and one of those trailers aswell.

 

:001_rolleyes:

 

cough... when hi-line pay me the thousands they owe me!!!...

[JimE]

Factory confirm that the saw is 4kw, and the conveyor is 0.7kw. If you want any other info let me know.

[TimberCutterDartmoor]

Factory confirm that the saw is 4kw, and the conveyor is 0.7kw. If you want any other info let me know.

 

Ab Fab. Expect a PM. Many thanks.