Ifor Williams TT105

[fen01]

HI,

 

I am after some advice.

 

Has anyone changed the lowering release valve on a IFOR TT105? How difficult is it and long long do you reckon it will take?

 

For some background - The tipper bed goes up and sometimes won't come back down. the system has been stripped and cleaned and this what i was told was wrong with it.

 

Many thanks in advance as i may not be on here for a few days of so.

 

Mark

[roseyweb]

Have you checked your remote as they are rubbish. You can hot wire it Down using 3 inches of cable and connecting the two left hand pins on the socket

[chainsawdom]

if it was coming down slowly id of said it was the valve in the actual tipping ram which is located by removing the pipe from the ram and getting a little screw driver in there and turning anti clock wise by about 1 to 2 turns.

[fen01]

Cheers for the advice.