nokka 400 timber bed processor problems - anyone know of any spares/help

[Joy Yeomans]

just refurbed our nokka bed processor with new bearings and put back together and it wont work ! very head scratching as the oil temp light is on, but oil temp is fine, i think this may be the problem, but cant seem to override this to enable the other functions to move in order, as it will operate the chainsaw but wont operate the grab but then can get the rollers to move but wont operate the measuring of stem

 

thinking it must be in the control box as all solenoids seem to work when operated with pushing by hand with a small screwdriver

 

any help much appreciated as it needs to go on a contract on monday

 

help!

 

any help please reply or ring Rohan and Tony direct on 07970 040755

 

if all else fails will need a cheap harvestor!

[Charlieh]

Hi Joy,

 

I dont think Tony was liking the electrickery on the machine if they want a hand again this evening give us a shout and I will pop over but i think they are well on the way now with it (and it doesnt involve a gas axe).

 

As an update the oil temp light is now sorted so some controls are back, such as saw, reverse feed and slewing but the forward feed roller, metering and delimbing functions still dont seem to be functioning correctly, I suspect these are all operated together from one function on the joystick but am not 100% so if anyone knows about the finer details of said machine Im sure Rohan & Tony would appreciate any info

[Joy Yeomans]

charlie - thanks big time for your electric o level help! - the lads hate electrics, usually tonys dad is called in for electric problems - rohan said if you wanted to come down and have a day to try and sort it finally he'd see you right!

 

 

 

 

 

 

 

(in sticks)

 

they have popped out but johntys at the yard, and they will be back lunchtimeish.

 

thanks

joy:thumbup1: