Jump to content

Log in or register to remove this advert

Any GX670 experts ?


Sideleaner
 Share

Recommended Posts

Log in or register to remove this advert

to my surprise the defective cylinder has more compression than the good one :thumbup1:

I have about 120 psi/sqinch on the bad one and 100 psi on the good one.

 

And of course the difference between the two is not serious in this case since it's a V-Twin! The higher pressure on the "cold" cylinder might be due to coking up. I can't remember what the pressures were on mine but I will test them and post them on here (warm engine of course)...

Link to comment
Share on other sites

And of course the difference between the two is not serious in this case since it's a V-Twin! The higher pressure on the "cold" cylinder might be due to coking up. I can't remember what the pressures were on mine but I will test them and post them on here (warm engine of course)...

 

That would be interesting...thx for posting !

Link to comment
Share on other sites

Just a thought but it could be a defective ignition module/plug and the white smoke would be unburnt fuel. I had a GXV where the spark broke down at certain revs. take the plug lead off and run it, if it sounds the same as before, you'll know its an ignition problem.

 

Yes I thought of that myself. I am waiting for the paper carb gaskets to arrive, I will have them next week. Will test the sparks.

Thx for helping out

 

Merry Christmas

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.