Mitox cloning an Echo?

[Stere]

 

 

 

[kram]

Mitox are importers and dont make anything themselves. There are clones of the 2511 topper but I've not yet seen any with the rear handle.

 

 

I like the clones. 

[Henry218]

Do we have a preference on favourite top handles on the market ?

[Tree monkey 1682]

4 hours ago, Stere said:

 

 

 

I've got a mitox top handle ,to be fair it's a great saw ....lightweight quick cutter and no issues ,unlike my still 201t that has never ran right irrespective of a new carb fitted .also I had 4 echo saws in for repair all not oiling all fixed under warranty ..

But I've got to say the mitox top handle is quite good dunno about their traditional  saw as above 

[kram]

1 hour ago, Tree monkey 1682 said:

I've got a mitox top handle ,to be fair it's a great saw ....lightweight quick cutter and no issues ,unlike my still 201t that has never ran right irrespective of a new carb fitted .also I had 4 echo saws in for repair all not oiling all fixed under warranty ..

But I've got to say the mitox top handle is quite good dunno about their traditional  saw as above 

 

That will be idential to this in different colours, amazon or ebay may have the same saw from about £50 delivered.

 

25.4cc JonCutter G2500 Top Handle Arborist Gasoline Chainsaw Power Head With Saw Chain and Guide Bar from China manufacturer - Farmertec

WWW.FARMERTEC.COM

---

25.4cc JonCutter G2500 Top Handle Arborist Gasoline Chainsaw Power Head With Saw Chain and Guide Bar...

 

3 hours ago, Henry218 said:

Do we have a preference on favourite top handles on the market ?

 

Currently I would say the Makita UC002/UC003 is very hard to beat for ~£210-270. You'll need to also spend 70 for a 2.5ah battery and 50 for a charger, but a second 4ah battery will be with you in a month. Not quite the power of a 201 but it runs a 12" bar no problem. ThenI highly recommend the UC006 hedger and Ux001 split shaft power unit, each with a free battery.

[Tree monkey 1682]

On 09/06/2025 at 16:20, kram said:

Mitox are importers and dont make anything themselves. There are clones of the 2511 topper but I've not yet seen any with the rear handle.

 

 

I like the clones. 

To be honest that orange one you posted looks like an oleo mac/orange efco ..but wouldn't touch anything lower than a mitox ....atleast it's been proved to be safe !