Jump to content

Log in or register to remove this advert

Echo dcs2500t.


Gerbutt
 Share

Recommended Posts

Hello all.

 

I’ve got the above saw and it’s just started playing up. When I put the battery in the on off button lights up and it’ll work with the chainbrake off but when I put the chainbrake on the green light flashes. The on off button doesn’t turn off either. Any ideas what could be wrong?

 

Thank you

Link to comment
Share on other sites

Log in or register to remove this advert

10 hours ago, Gerbutt said:

 

Hello all.

 

I’ve got the above saw and it’s just started playing up. When I put the battery in the on off button lights up and it’ll work with the chainbrake off but when I put the chainbrake on the green light flashes. The on off button doesn’t turn off either. Any ideas what could be wrong?

 

Thank you

 

The blinking green light indicates the chainbrake is on. The meanings of 2 types of blinking warnings are in that book nobody reads called manual :)

Make sure you charge the battery before starting to play.

image.png.5f311ccb647aff933db5509756044786.png

Link to comment
Share on other sites

On 05/04/2022 at 10:54, peatff said:

That's complicated. What happens if you put the battery in while the chain brake is on does it play a tune ? I like petrol ones, when the engine is quiet the saw is off.

Can’t understand the idea about “complicated” part.

Putting fuel in = putting battery in

Pulling starter = pushing ON 

Turning OFF = turning OFF

 

Only difference - battery saw blinks to indicate brake is engaged and also turns off soon if you leave in the middle of kindergarden or next to the clueless groundies :)

Link to comment
Share on other sites

Hello again. With mine it’s flashing 4 times per second with the brake on and then it’s on all the time with the brake off. You can’t turn the saw on and off with the button which you could before?

Link to comment
Share on other sites

On 09/04/2022 at 18:09, Gerbutt said:

Hello again. With mine it’s flashing 4 times per second with the brake on and then it’s on all the time with the brake off. You can’t turn the saw on and off with the button which you could before?

If it happens with fully charged battery just get it to the dealer.

There is 5/2y warranty unit and non-turning off will definitely be covered :)

Normally the membrane button turns it off in any situation.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.