Jump to content

Log in or register to remove this advert

Freezing diesel? TW190


RPA
 Share

Recommended Posts

I have had to leave the chipper outside for the last couple of weeks because I cant get access to the shed due to the weather.

 

Topped up the diesel tonight and gave it a run in prep for tomorrows job. Started ok (bit spluttery) ran on min revs for 3 or 4 mins and cut out. Left it for 5 and tried again this time it ran longer but as soon as I increased the revs it died again. Did the same on the next try.

 

The engine got slightly warm so im thinking that a small amount of diesel will effectively get pre-heated and as soon as this is used it is basically getting starved of fuel if has gone thicker/frozen.

 

(coolant OK and not frozen)

 

Any help/advice would be appreciated.

 

Thanx

Richard.

Link to comment
Share on other sites

Log in or register to remove this advert

Hi Richard

 

If you have had your unit outside for some time, it could be that the fuel cap is not breathing properly, and this could be the cause of your problem,

 

alternatelvly

 

You could have water in the fuel line which has frozen and this is causing fuel starvation, please check the in line filter for water contamination, and change if required.

 

Most off the shelf (ie pump delivered) fuels, including red, have a frost protection additive in the mix and it is usually another cause other than frozen fuel.

 

regards

Timberwolf Tech Support

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.