Jump to content

Log in or register to remove this advert

Dmm oval biner softlock?


stihlmadasever
 Share

Recommended Posts

Hi folks,Had our kits lolered yesterday and had a failure with a dmm oval biner due to a "soft lock".

Any loler guys fancy giving me the explination to that one.

Ive tried the biner and its seems fine to us,all triple locks functioning fine id say.The biner was on my side strop,so it does get used a lot.

We dont get to speak to our loler inspector so im perplexed on this one.

Thanks in advance.

Link to comment
Share on other sites

Log in or register to remove this advert

Hi folks,Had our kits lolered yesterday and had a failure with a dmm oval biner due to a "soft lock".

Any loler guys fancy giving me the explination to that one.

Ive tried the biner and its seems fine to us,all triple locks functioning fine id say.The biner was on my side strop,so it does get used a lot.

We dont get to speak to our loler inspector so im perplexed on this one.

Thanks in advance.

 

Hold the barrel with your fingers, then with your other hand push against the spine and try to rotate it, if it opens that is what i'd call a soft lock as essentially you can use it as a 2 way. basically the pin slot wears creating a little ramp.

 

Hope that makes sense

Link to comment
Share on other sites

Hold the barrel with your fingers, then with your other hand push against the spine and try to rotate it, if it opens that is what i'd call a soft lock as essentially you can use it as a 2 way. basically the pin slot wears creating a little ramp.

 

Hope that makes sense

 

Yeah makes perfect sense marc thanks.

I ll try that and see if the biner opens.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.