Is it possible ?

[openspaceman]

I'm going to have a go at saving it but I think someone has "saved " it before as the piston is aftermarket

 

Sent from my LG-H850 using Tapatalk

 

As Spud said the bore may be ok if the nikasil layer is intact (it's only 0.4mm thick).

 

Whilst Meteor pistons are available for about 20 quid beware that the cylinders may be chrome plated rather than nikasil.

 

A reason why an after market piston will fail is that the aluminium pick up adhering to the bore has not been thoroughly removed. It really needs to be done by dissolving the aluminium from the nikasil

[monkeymoreton]

 

Here's some pics of the poor saw I know its my fault the saw did this guilty of using old fuel.

 

Sent from my LG-H850 using Tapatalk

[openspaceman]

Here's some pics of the poor saw I know its my fault the saw did this guilty of using old fuel.

 

Sent from my LG-H850 using Tapatalk

 

It looks salvageable, can you feel the depth of the gouges with your finger nail?

 

It seized from running too weak from the look of the plug.

[monkeymoreton]

It was old fuel that did it

 

Sent from my LG-H850 using Tapatalk