Entec 25ph

[dan494]

I'm using a petrol 25hp entec chipper 1997 model and the rollers seem really slow. Also the bottom one will stop now and then if anything gets jammed in there until you reverse the rollers (top one continues) anti stress seems to be working fine. Not sure if it's adjustable if so I'm guessing it's done on the picture attached? Or something else wrong?

Thanks

 

Sent from my SM-G930F using Arbtalk mobile app

[Timberwolf Official]

Hello Dan

 

The no stress unit is not adjustable, The issue you describe could be either a mechanical or hydraulic issue, e.g. roller spline drive worn or a hydraulic component failure.

 

Any authorised Timberwolf dealer will be able to diagnose and correct the problem is for you, your nearest dealer can be found on the Timberwolf website

 

Hope this assists

[dan494]

Thanks. I'm not overly familiar with this model so was hoping the rollers were just at the wrong adjustment. Will have the owner get it looked at. Thanks for your time

 

Sent from my SM-G930F using Arbtalk mobile app