201t fuel line re fit

[Danavan]

So I did the classic non mechanic thing. Had to take my 201t apart to fix a problem now I can't put it back together. Should remember from past experience to take lot's of pictures.

 

The problem is I can't find where to feed the fuel pipe from the pot back to the carb.

 

Can anyone point me in the right direction. Looked online but can't find any diagrams of what I want.

[Jiles]

Does this help?

 

Stihl MS201T Chainsaw New OEM complete fuel tank assembly 1145-350-0811 | eBay

[Danavan]

Does this help?

 

Stihl MS201T Chainsaw New OEM complete fuel tank assembly 1145-350-0811 | eBay

 

No. But thanks for the reply Jiles. Will try and get a picture up later today. I am trying to work out where on the fuel tank assembly I need to feed the fuel pipe through from the pot. Their is a hole to the left of the manifold but that is the wrong side for the pipe bends and pre molded kinks.

[spudulike]

No. But thanks for the reply Jiles. Will try and get a picture up later today. I am trying to work out where on the fuel tank assembly I need to feed the fuel pipe through from the pot. Their is a hole to the left of the manifold but that is the wrong side for the pipe bends and pre molded kinks.

 

I think you are mixing the fuel line and impulse line. The impulse line runs from the base of the cylinder and NOT the fuel line.

[Danavan]

I think you are mixing the fuel line and impulse line. The impulse line runs from the base of the cylinder and NOT the fuel line.

 

Your right spudulike! Same thing in a non mechanic mind like mine even though it isn't. Cheers for the nomuculture. Well that seals it I really am a daft sod when it comes to this stuff. Had a look at someone's saw today and it was so simple it is embarrassing!

No matter. Live and learn. Cheers again spudulike.