Jump to content

Log in or register to remove this advert

You need to be logged in to see additional information and be able to contact the advertiser!

High Frequency Vacuum Kiln

   (0 reviews)

High Frequency Vacuum Kiln

   (0 reviews)

£27,500


  • Price £27,500
0 Questions
0 Reviews
268 views

Description

Perfect condition High-Frequency Vacuum Kiln, only 5 cycles from new.

 

It is possible to dry most native UK timber species straight off the sawmill down to 8-11% MC in 8-16 days.
If the milled timber is Air-dried for 3-6 months then the Kiln drying process is reduced to 2-4 days to 8-11% MC for Softwoods and 6-12 days to 8-11% MC for Hardwoods up to 12” Thick and 1200mm wide. It is equipped with a hydraulic press that ensures the timber is kept perfectly flat during the drying process, this adjusts automatically throughout the process to maintain the same pressure. This method of drying produces the finished timber with almost zero defect/cracking etc as all the moisture is extracted through the end grain (As the living tree took on the water) and not the entire surface as in conventional kilns. 

 

No stickers are required as in conventional kilns, therefore the capacity of 4.4cbm is the actual amount of timber and not the chamber space as with conventional or standard vacuum kilns.

The costs are also considerably lower than conventional Kiln drying and much more eco-friendly.

For example a full load of mixed Air-dried timber of 4.4 cubic metres at 35% MC down to 8-10% MC would normally take 6-9 days and cost around £350-450 in electricity. 

 

New cost of this machine including shipping was £58,500.00
 

Portrush, Northern Ireland - United Kingdom



Recommended Questions

There are no questions to display.


Other adverts from Silvmore




About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.