Jump to content

Log in or register to remove this advert

ChainsawAl

Member
 View Profile  See their activity

  • Posts

    29

  • Joined

  • Last visited

 Content Type 

Everything posted by ChainsawAl

  1. ChainsawAl
    Cheers for the replies peeps, decided on a push switch Bosch pro. Had good reviews. And i decided to stick with a push switch, as its what im used to and a lot of you thought the same. Thanks again
  2. ChainsawAl
    Back again My trusty cheap Macallister 115mm has finally died today and been looking immediately for another Grinder, as i use them a lot. My question is what is better to use when sanding carvings, my last one was a push switch, but some people say paddle would be better but im unsure, as i was happy with the toggle switch for sanding, I do have a bigger grinder which i use for other things like cutting metal, which is more suited to a paddle switch imo. Any recommendations? i want it corded, and under £80 ideally, 115mm or 125mm? i usually use 115mm but if 125mm is better i dont mind. thanks
  3. ChainsawAl
    yeah i noticed a few of the batter have that style, but without the drum. yeah i dont think i have the skills, might just have to keep i as a back up saw or just sell it on
  4. ChainsawAl
    Thanks for the help guys, unfortanetly still having no luck, not even chainsawbars can help on this one. it doesnt help that the sprocket aint a full circle, more an oblong. Ive attached photos to show what i mean
  5. ChainsawAl
    Stere - so does that mean, any of those makes listed i can get a 1/4 inch sprocket that will fit them, will fit my battery chainsaw to?
  6. ChainsawAl
    cheers gobby, he hasnt got it listed, unsuprisingly, so will contact him
  7. ChainsawAl
    Hey peeps, hope everyone is doing well and carving is going well, been a while since ive been on here. A long shot this but ill try, I have a Cramer 40v chainsaw, has worked well for a cheap saw, so ended up getting another one as it worked out in a deal. Anyway im thinking of putting a dime tip bar on the new one, unfortunately i have no idea where to start on where to get a sprocket to fit this saw? Was wondering if anyone has any experienced with this saw, or a battery chainsaw in general. I think they are compatible with Greenworks saws to. Any help would be greatly appreciated thanks Al
  8. ChainsawAl
    Cheers mate, tried it out yesterday. It seems to be working fine, but might need to check more thoroughlyas I couldn't really tell if they were protruding.
  9. ChainsawAl
    @wisewood is this loose enough, I've just bought a new Stihl chain to fit my dime bar. And wondering if this is loose enough. Also do I need to file the backs off the teeth, as the teeth seem to be sloping back anyway Thanks
  10. ChainsawAl
    @wisewood it's a Stihl m170, been looking at one for such a long time that I finally got one. Cool, ok, so so you usually use an standard bar to do your bore cutting with? Couple of drive links, as in the distance from the bar right?
  11. ChainsawAl
    Hey there. I haven't had experience in using a dime tip bar yet. But just waiting for my new chainsaw to come in the post with a dime tip bar on it (very excited 😁) Was wondering if they are easier to cut through when you plunge cut into wood, compared to your standard bar? Also how loose should the chain be on a dime tip bar, heard so.nahybsaybto have it really loose but how loose is loose? 🤣
  12. ChainsawAl
    @Paddy1000111 thanks paddy, will do that tonight. 👍
  13. ChainsawAl
    It's a Titan TTL759CHN 40cm 40cc Cheap make I know, that's why I was wondering if they would be the same. As I see Stihl and husky do some but not sure if theu are different sizes. @nepia ah ok cool,I'd imagine they would be,
  14. ChainsawAl
    Hi there, Ive lost one of the nuts that hold the bar in place, I'm trying to find a replacement but not sure what type and side I need. Are they all standard thread size? Cheers
  15. ChainsawAl
    What would you use a power file for mainly? @gobbypunkNo I know the pad screws on to the grinder. I just meant the actual grit pads are hook and loop?
  16. ChainsawAl
    Are these backing pads hook and loop design like a random orbital sander? Won't they come off at the speed that a grinder goes?
  17. ChainsawAl
    Cheers lads. I'll have a look out for those klingspor fibre discs then. If you say they're good. @gobbypunk, I don't think I'm at that good yet. I've literally just started, done a dodgy mushroom and some Halloween pumpkins that's about it. But thanks for the offer 👍
  18. ChainsawAl
    Ok cool, I have a 4.5 inch grinder, but not a backing pad. Been using those flap grit sander on mine, but they do plug up quickly. What's the filling sanded?
  19. ChainsawAl
    Hi there I've just started getting into carving, I've got two chainsaws now, one 40 and the other 46cc. I'm waiting to get a smaller one with a carving bar on. But was wondering what's the minimum of tools you need to get going with carving, to make them look vaguely good. I watch these YouTube guys and they have, die grinders, normal disc grinders, dremels, flame torches, gougers and so on. Do I need all these? Or what is the minimum I need for budget conscious, but still wanting the carvings to look half decent? Thanks
  20. ChainsawAl
    Haha ??. Not a fan of them myself they're ok. But the guy down the road sells them, so my old man just goes to him for the ease of it. Had some problems but that's more for to the fact of my old man not looking after them properly over the years. ?
  21. ChainsawAl
    Excellent cheers lads. Feel a bit thick now as I usually try and Google everything! ? Oh well you live and learn ?
  22. ChainsawAl
    This forum is dead. Does anyone know a forum where people are actually active?
  23. ChainsawAl
    Hi I've found an Oregon chain. I've measured it as a .325 pitch chain with 66 links. What I don't know is it's gauge. How do I find this out? It's got 21 written on the gauges.. I doubt that means anything though. Do I need a special measuring instrument just to see the gauge? Thanks
  24. ChainsawAl
    Thanks for the reply Dan I'll stick to .325 then. These chains will only fit standard bars then i take it? I've it wouldn't take a quarter bar for example?
  25. ChainsawAl
    I see. Well my old oleo Mac 946 was set up on a .325 chain so being 46cc that would fit with what your saying. Can I change the 946 to a 3/8 lo pro on a 16" bar? It's currently taking a .325 chain on a 20" bar. Cheers lads

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept