Treeman58

Thank you very much for the info. 🙂

Hi, Have a Husqvarna 120 Mark II chainsaw and am trying to locate the oil adjustment screw. I have looked online and dosn't appear to be in the same place as other models? Thanks

Thanks very much, can now see the connector that you referred to in the first reply. 👍

It's the other end (the one that is visable in the first pic) that i want to know where it goes, it's already attached to the cylinder. Thanks 🙂

Hi, Have recently rebuilt this saw onto a new crankcase and upon starting it up it cuts out completely when throttle is applied. Should the impulse line go to the carb as i was under the impression it should slide onto a brass connection, however there is nowhere for the line to go and am thinking this could be the problem? The saw was working before it was rebuilt. Thanks

Thanks for all the replies and suggestions. I think the next step will be to try on a few somewhere, whilst eating some pies. 🙂

Hi, i am looking for some recommendations for a new harness. I am only very slim (28 inch waist) and am wondering if there are any paticular harnesses that will fit better. I was looking at the Treemotion but i can see that its a one size fits all job, so not sure weather it would be best avoided in my situation or not? I am aware the best thing to do is to try before i buy but wanted some opinions first. Thanks 🙂

Greenmech 150 Wood Chipper stolen 3rd June from Mapplewell, Barnsley circa 3pm. White Ford Transit van (newer style) caught on CCTV camera. Obviously bit of a long shot but wanted to put it out there.