Jump to content

Log in or register to remove this advert

Buel

Member
  • Posts

    15
  • Joined

  • Last visited

Posts posted by Buel

  1. 1 hour ago, Ratman said:

    Building regs stipulate you only need 300mm (12 inches) in front of your stove. The deciding factor for you will be to decide how far the door opens out? Obviously you dont want ash/embers falling from your door out on to the floor. I’ll measure my hearth when i get home but it defo aint anywhere near 1000mm deep front to back, and my stove is inset to the fireplace, signed off and certified so obviously conforms to the regs or i wouldn’t of received the cert.

    Wow, this is interesting - thanks. Yes, please do measure, if you can.

    Just spoke to the developer and he said that the wall is not necessarily able to take an inset burner....but he sounded willing to help?

  2. Hello.

     

    We were planning on adding a fireplace to our new build house but have been told that the hearth will have to protrude 1000mm in the room area by the wood burning stove supplier (for safety reasons). The room dimensions are only 4067mm x 3627mm so that's 36% of the room already taken up by the hearth!

    I'm guessing that most people with fireplaces / log burners don't have significantly bigger rooms than us so please can I ask if this is a common issue and, most importantly, is there anything that can be done, or is 1000mm the rule?

    Image of fireplace dimensions attached.

    Plot 30 Fireplace v2.jpg

  3. Hi,

    Thank you for the fantastic answers - really very helpful.

    Briefly, until I can post more tomorrow:

    - There is no chimney on the property so we will be fitting an external flue up the side of the house

    - We think the Aire has 'direct air' which will take air through the inlet on the back of the stove, I think?

    - We have been quoted £1,200 for the stove and £2,000 for the fitting work (estimated)

     

    How does this sound?

     

    Thanks again!!

  4. Hi again all,
     
    We are in the process of buying a new build house which is due to be completed in July. We've always wanted a logburner and so have agreed with the developer to have a fireplace built in the living room. As this is a bespoke request, they've asked us what measurements we have in mind.
     
    We think the most suitable stove for us will be the Charnwood Aire (thanks to the advice on this forum) and have taken a look at the product's measurements (image of these below) along with the fire safety regulations that we could find online, however, we are still apprehensive about passing these on to the developer until an expert has agreed that they would meet fire regulations. We have contacted our local stove supplier who we are hoping to purchase the Charnwood Aire from to see if they would be able to help, but we are waiting to hear back so in the meantime I thought I would post on this forum and see if anyone could help. 
     
    Please see the below diagram - would this fireplace and stove setup comply with current fire safety regulations on a new build property? 

    aaaaa.jpg

    bbbb.PNG

  5. Hi there,

    Newbie here. My wife and I are in the process of buying a house (what a time to be half way through!!). We have been able to negotiate a fireplace being added to the living room. Due to the building already being started for someone else, who dropped out, we will only be able to have a fireplace with an external flue fitted to the side of the house (not 'full' chimney).

    We don't really know where to start next though - we have seen multi fuel log burners, purely wood burners, vastly different prices, etc, please can anyone give me a few tips on what to look for if £1,000 is our maximum budget, and, of course, what to look out for?

    Thanks, all.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.